5 Easy Steps To Change Your Car Battery
Changing your car battery can be a huge challenge on your part especially if you do not know the proper ways and steps in doing the procedure. However, battery change is actually very simple as long as you have the necessary materials and the basic knowledge of the process. In fact, one of the hardest things in changing the battery is simply lifting it out of the car because the weight can be pretty heavy on your part. Other than that, the procedure can already be done effortlessly. Here are 5 easy steps on how to change your car battery as approved by a reputable auto repair company.
Things to Consider in Battery Change
Before you can begin in changing your battery, you must first have all the needed materials for the procedure. These items include wire brush, wrench, screwdriver, and of course, your replacement battery.
Step 1 — While the engine is off, you can open the hood of the car and locate for the battery. You must detach the black battery cable from the battery itself by loosening the nut using a wrench. Aside from a battery wrench, you can also try using battery pliers. You must twist and pull the end of the cable using your hand. If you have a hard time removing the cable, you can purchase a battery terminal puller, which can be seen in a local auto parts store. This will help you remove the cables without causing any damage to the battery. It is also not advisable to use a pry bar since it can break the battery terminal or do other types of damage.
Step 2 — Once the negative of black cable wire is completely detached, you can now remove the positive battery cable. This cable is easily distinguishable since it is red in color. Removing this wire is also similar to removing the black cable.
Step 3 — As soon as the cables are detached, you can now proceed in removing the battery hold down clap. This can be done easily by using a combination wrench or simply using a socket and ratchet tool. Once the clamp is released, you can now remove the battery out of the battery tray. Most batteries are heavy, which is why it is necessary to remove them from the car using both hands while grabbing the bottom portion. However, there are also batteries that come with a handle. This makes it easier for you to release it from the tray.
Step 4 — Once the battery is removed, you can use baking soda and water to remove any corrosion from the battery tray and as well as the hold down clamp. Make sure to use your wire brush to ensure that the tray is cleansed thoroughly. Aside from this, it is also important to clean the cable connectors using the same type of brush. If the corrosion is quite severe, you can buy a battery cleaning solution to do the job effectively.
Step 5 — The last step is to place the replacement battery into the hold down tray and secure it using the clamps. You must spray both terminal ends with an anti corrosive solution for maintenance purposes. You can then attach and tighten the positive battery cable and as well as the negative battery cable. It is important to check that all cables are attached correctly and tightly on their terminals. If the battery is not placed properly, the will not start.